Profile

Non Chemical Catalytic Scale 

Applications include: Hot water heaters, Urinals, Vending Machines,Nozzle protection, humidifiers, bed pan washers, pump protection,shower head protection and system protection generally. 

• Offers constant supply of treated water

• Easy installation

• No need for separate drinking system

• No backwash or cleaning required

• No power source required

• Works in a variety of waters including brackish and sea water

• Reduces/removes existing scale

• Reduces algae build upInstallation is simple even in difficult locations

• Heavy gauge steel frame and base
• Ball bearings (except as noted)

• Thermal protection, as noted
• Capacitor start design for high starting torque
• Capacitor start/capacitor run design for higher efficiency, as noted

• Ball bearings
• Heavy gauge steel constructions
• Economical split phase or capacitor start designs, as noted

• 1.0 Service Factor
• Automatic reset thermal protector
• Meets temperature code T3B
• Economical split phase or capacitor start designs, as noted
• UL Listed File No. E12044
• CSA Certified File No. LR47504

• Ball bearings, mechanically locked on shaft end
• NEMA Service Factors
• UL Recognized and CSA Certified

• Motors are suitable for 10:1 VT on all frame sizes and10:1 CT up to 365T frame (Except where noted)
• 1.15 Service Factor
• TSTATS available from Mod Central
• Class F Insulation
• Nameplated 60/50 hertz
• UL Recognized, CSA Certified and CE Marked
• Three year warranty

• 1.15 Service Factor
• Nameplated 60/50 hertz at next lowest horsepowe
• Will accept C-Face Kits as noted, also see Accessories section
• Severe duty kits available, see Accessories section
• Shaft slinger, regreasable bearings (182T and larger), lead lugs (364T and larger),and bearing caps on 444T and larger
• Ball bearings, except where noted
• UL Recognized and CSA Certified
• Two year warranty on EISA efficient motors (bold blue Catalog Numbers)

• Cast iron frame and brackets
• Inverter Duty 10:1 Variable Torque and 10:1 Constant Torque, 1.0 SF
• 1.15 Service Factor
• Class F Insulation
• Standard assembly F1, reversible to F2 assembly
• UL Recognized, CSA Certified, CE Mark
• Two year warranty

• Precision balanced to .08”/sec
• Extended grease tubes, regreasable in service
• Brass drain and breather
• Meets General Motors GM 7E-TA Automotive DutySpecification
• Meets IEEE45 USCG Marine Duty, API RPI4F for offshoreplatforms,IP56
• Meets NEMA MG1 - 1.26.6 Waterproof specification
• Hazardous Duty™ Division 2 CSA certification nameplate
• Division 2 / Zone 2 Class I (gases), Groups A, B, C, D
• Meets temperature code T2B
• Actual test and vibration data supplied with each motor
• Ball bearings (except as noted)
• UL Recognized (through 449T) and CSA Certified andCE Marked
• Five year warranty