Profile

• Size Range: 1⁄2" through 2"
• Material: Carbon steel
• Finish: Plain or Galvanized
• Service: Structural attachment to concrete ceiling lug is usedin conjunction with Fig. 299 (see page 103) forged steel clevisand anchors of sufficient strength to hold the desired load.
• Ordering: Specify rod size, figure number, name and finish.

• Size Range: 3⁄8" through 1 3⁄4"
• Material: Carbon steel
• Finish: Plain or Galvanized
• Service: Structural attachment to concrete ceiling whereflexibility is desired. Concrete clevis plate is normally usedin conjunction with Fig. 290, page 102, weldless eye nut, orFig. 278, page 98 welded eye rod and anchors of sufficientstrength to hold the desired load.
• Ordering: Specify rod size, figure number, name and finish.
• Note: Sizes 3⁄8" through 1" are supplied with bolt and nut.Larger sizes are supplied with pin and cotters.

• Size Range: 3⁄8" through 2 1⁄2"
• Service: Used as a replacement to standard rear bracket load pin to facilitate easy removal attime of rebuild or testing. May be supplied with new orders, when specified.
• How to size: Select size consistent with load pin diameter for Fig. 200/201 or Fig. 3306/3307.
• Features:• Designed to sharply reduce the time necessary to remove a badly corroded conventionalpin and may also eliminate damage to the bushing and bracket assembly, particularly ifthe pin and bracket are corroded.• Minimizes “free play” between pin to pin.
• Ordering: Specify figure number, nominal pin size and name.
• Installation: Shipped assembled. Remove nuts and washer. Loosen sleeve on pin and installsleeve/pin. Re-install washer and one nut. Tighten hex nut to snug. Install second nut

• Used for 50ml (two component) dual-cartridge epoxy,dispensing manually
•  Mixed automatically, convenient to useItem No. 58106

It can design dispensing track.Item No. 58207

Used for 300ml cartridge packed anaerobic adhesivesand silicone sealants, dispensing manuallyItem No. 58102

Used for 300ml cartridge packed anaerobic adhesivesand silicone sealants, dispensing manuallyItem No. 58101

• Used for 300ml cartridge packed anaerobic adhesives,silicone sealants and polyurethane adhesives,dispensing pneumatically
•  Air pressure 0.3MpaItem No. 58103

• Used for 50ml (two component) dual-cartridge epoxy,dispensing manually
•  Mixed automatically, convenient to useItem No. 58105

-

-

-